Exceptional Interlaminar Bond
Low Moisture Absorption
Enhanced Dimensional Stability
Low Z-Axis Expansion
Stable Dk Over Frequency
Increased Flexural Strength
Filters and Coupler
CER-10 is a ceramic loaded DK 10 laminate, based on a woven glass reinforcement. CER-10 is a result of Taconic’s expertise in both ceramic fill technology and in coated PTFE fabrics.
CER-10 exhibits exceptional interlaminar bond strength and solder resistance. CER-10’s proprietary composition results in low moisture absorption and uniform electrical properties.
CER-10’s woven glass reinforcement ensures excellent dimensional stability and enhances flexural strength. This DK 10 laminate exhibits low Z-axis expansion (CTE 46 ppm/°C), allowing for plated-through-hole reliability in extreme thermal environments.
CER-10 laminates can be sheared, drilled, milled and plated, using standard methods for PTFE/woven fiber-glass materials. For processing information, refer to the CER-10 Fabrication Guidelines.
CER-10 laminates are ordered clad on both sides with 1/2, 1, or 2 oz. electrodeposited copper foil. This laminate is available in panels sizes cut from standard master sheet sizes of 36” x 48”. Contact our Customer Service Department for more information.
CER-10 laminates are tested in accordance with IPC-TM-650. A Certificate of Compliance containing actual test data accompanies each shipment.